Automatic tube,automatic calibration, stablet operation
Metering pump selection and adjustment of material filling volume and hose in agreement
High precision benchmarking system
Want A Free Consultation
NF-120 Cosmetic Ointment Grease Soft Plastic Fully Automatic Tube Filling Equipment
AIPAK NF-120 Tube filling equipment is suitable for filling, sealing and date printing of products in hose packaging in daily chemical, food and chemical industries. It adopts mechanical structure, stable operation, fast speed, good effect, low noise, simple structure, convenient operation and maintenance, and low failure rate. The equipment design and manufacturing meet GMPrequirements; it adopts sanitary and aseptic design, and the sealing adopts special sanitary mechanical seal. Each pipe mouth adopts drawing treatment to form a smooth transition, avoiding the cleaning dead corner caused by direct socket welding, minimizing the possibility of microbial growth, and avoiding accidental contamination of the product.
FEATURE
1.The filling and sealing part is installed above the platform, and the semi-closed non-static outer frame can be seen inside the visible cover, which is easy to observe, operate and maintain;
2.Stainless steel operation panel, plexiglass protective cover and door protection function installed;
3.The upper tube device is equipped with a vacuum adsorption device. After the upper tube interacts with the pressure tube device, the hose is inserted into the upper tube station;
4.Optoelectronic benchmarking station, using high-precision probes, stepper motors, etc. to control the hose pattern to be in the correct position;
5.No tube and no filling, after the injection is completed, the air blowing device blows off the tail of the paste; anti-drawing, anti-drip filling;
6.The waste cutting manipulator cuts the waste edge at the tail of the hose, and has special-shaped sealing such as right angle, R angle or arc;
7.Failure alarm, overload shutdown, water pressure protection, air pressure protection.
DATA SHEET
VIDEO
CONTACT
Get in touch with an expert
We´re looking forward to find the suitable solution for your product. Please contact:
Andrew Yang
Engineer Director
Phone: +86 181 6426 8586