AKZ-100 Full Automatic Face Mask Production Line (One-to-Two)

Function Introduction

This production line is a fully automatic one-to-two face mask machine, one body machine drives two ear band machines.

After the main body machine outputs the mask body, the mask body sheet is conveyed to the turning mechanism by a conveyor belt structure. The reversing mechanism is used to flip the mask plate onto the belt connected to the ear band machine, and then the mask sheet is conveyed to the first mask plate on the front of the ear band machine through the conveyor belt, and finally the mask sheet is placed on the ear band by the cylinder pressing In the mask plate of the machine, the ear band machine is used to complete the welding of the ear bands of the mask and the edging, thereby completing the production of an ear band mask product.

Main Machine configuration Advantages

1.Use steel to cover the rubber edges to avoid the rubber broken after long usage.

2.Use rubber plastic with better wear-resisting spec compared with plastic roller

3.Mask nasal bridge band Tension control machine ensure mask strap in same length.

4.Mask nasal bridge band deliver device could ensure mask looks flat and nice.

5.With material sensor, the machine will stop working if no material.

6.With the two raw material tension control devices we could avoid raw material is blocked and avoid the material being blocked.

7.Use the static eliminator to eliminate static on the non-woven surface.

8.Our new style motor no needs oil.

9.We add a fan around the ultrasonic horn to lower its temperature and increase its lifetime.

10.Use the mask main part deliver device to deliver the mask main part to 2 welding machines