AKZ-D2 Face Mask Making Machine

This Folding face mask making machine (high-speed type) is an upgraded version of the ordinary folding face mask making machine on the market. The biggest feature of this machine is non-stop operation, which is precisely aligned by high-speed servo motor drive. The device integrates main body welding, built-in nose bridge strip, half-folding, ear band welding, and breathing valve punching. The equipment can be equipped with an automatic coding device. The equipment reserves the required position of the coding device. Customers only need to provide the standard size of the printer.The entire system is equipped with an automatic tension system as standard, surpassing all competing manufacturers, and truly achieves no tension or replenishment tension. The entire system is equipped with a material-free monitoring system as standard, which is worry-free in operation.

FEATURE

1. Cutting roller
We use the chrome steel to cover the rubber roller both sides .So that the rubber is not crack from side after extended periods use.
2. Traction roller
We use the silicone rubber materials instead of the butyronitrile materials .The silicone rubber materials is good abrasion
resistance and will not crack
3. PLC touch screen
We use DELTA group brand PLC touch screen .
4. Mask nose strip tension controller
We use Mask nose strip tension controller .This device can avoid the nose strip differ in length .
5. Nose strip straight- feeding device
We use Nose strip straight- feeding device , It can ensure the nose strip be feeded straightly in the processing, so the finished
mask will be flat and artistic.
7. Non woven raw materials sensors
We use Non woven raw materials sensors,once the raw materials use up,machine will stop automatically
8. Raw materials tension controller 1
We use the Raw materials tension controller to avoid the materials plugging .
9. Raw materials tension controller 2
Our machine is equipped with two braking ways . One is belts pressing and another is screw fixing . You could choose either one or use both according to your need.
10. Raw materials EPC device
We use raw materials EPC device ,to do materials adjustment.
11. Machine door lock
We just door lock ,with out the key,worker can not start the machine.
12. Frequency converter
We use DELTA group brand frequency converter .
13. Machine body and materials feeding connect board,We connect Machine body and material feeding frame with connecting boards,so that the running of whole machine will be very
stable.
14. Electrostatic eliminator
In our machine we have one electrostatic eliminator . to eliminate non woven mask surface static.
15. Machine motor
Our geared motor is new type and no need refuel.
16.Fan
We install the fan near the ultrasonic horn ,to Lower the horn temperatures,to to extend ultrasonic life.