DW Series Mesh-Belt Pharmaceutical Dryer

Moisture Measurement
Effects of Particle Size
High Effective

DW Series Mesh-Belt Drier

The machine is suitable for drying the material in pharmaceutical chemical foodstuff, elastic gum, electronical industries dewatering vegetable, particle feed, gourmet powder, shredded coconut stuffing, organic color, compound rubber, acryl fibre, medicine product, medicine material , small wooden product, plastic product, aging and solidification for the electronic component and device.

The materials are uniformly put on the mesh-belt by the material charger. The mesh-belt uses generally 12-60mesh stainless steel wire net and it is drawn and moved inside the direr by a transmission device. The drier is composed of several units, the hot air is circulated separately.Some exhausted gas is discharged with a special moisture elimination blower. The waste gas is controlled through an adjustment valve.The hot air passes through the meshbelt covered with the material from the top to the bottom or from the bottom to the top and this will complete the heat and mass transfer process. This process will bring will fall into the material collector continuously. The top nand low circulation units can freely equipped according to the users demand. The unit can be selected according to be demand.

FEATURE

This machine is flowing and continuous type drying equipment firstly made by our factory. The machine is used for drying the piece, tape and particle state materials with good ventilation. The machine is suitable for the materials such as dewatering vegetable, herbal medicine of traditional Chinese medicine and others, for which the water content rate is high and the high temperature is not allowed . The machine owns the advantages, that its drying speed is fast,the evaporation strength is high and the product quality is good . The dewatering filtering cake state paste material, after the particle makeing or bar making, can be dried also.

DATA SHEET

Model	DW-1.2-8	DW-1.2-10	DW-1.6-8	DW-1.6-10	DW-2-8	DW-2-10
Unit number	4	5	4	5	4	5
Belt width	1.2 m	1.2m	1.6m	1.6m	2m	2m
Drying section length	8mm	10mm	8mm	10mm	8mm	10mm
Thickness of the material to be covered	10-80mm	10-80mm	10-80mm	10-80mm	10-80mm	10-80mm
Temperature	60-130℃	60-130℃	60-130℃	60-130℃	60-130℃	60-130℃
Steam pressure	0.2-0.8Mpa	0.2-0.8Mpa	0.2-0.8Mpa	0.2-0.8Mpa	0.2-0.8Mpa	0.2-0.8Mpa
Steam consumption	120-300kg/h	150-375kg/h	150-375kg/h	170-740kg/h	180-500kg/h	225-600kg/h
Drying time	0.2-1.2h	0.25-1.5h	0.2-1.2h	0.25-1.5h	0.2-1.2h	0.25-1.5h
Drying strength	60-160 kg H2O/h	80-220 kg H2O/h	75-220 kg H2O/h	95-250 kg H2O/h	100-260 kg H2O/h	120-300 kg H2O/h
Total power of the blower	9.9kw	12.1kw	9.9kw	12.1kw	18.2kw	22.2kw
Total power of the equipment	11.4kw	13.6kw	11.4kw	13.6kw	19.7kw	23.7kw