High frequency motor atomizer
Moisture evaporate rapidly
Can drying heat sensitive raw materials
Want A Free Consultation
YPG Series Industrial Ceramic Spray Dryer Ceramic mud spray drying equipment
AIPAK YPG series ceramic spray dryer is a widely used process in the liquid process forming and drying industry. It is especially suitable for the production of powdered and granular solid products from solutions, emulsions, suspensions and pasty liquid raw materials. Therefore, spray drying is an ideal process when the particle size distribution, residual moisture content, bulk density and particle shape of the finished product should meet the criteria.
YPG series Ceramic Spray Dryer Application:
Food Industry:full-cream milk powder,Ga prion,cocoa,milk,milk substitute,egg white(yellow).Oats,Jishi,coffee,instant tea,spices seasoning meat,protein,soybean,peanut protein,such as protein hydrolysate.Corn pulp,corn starch,glucose,pectin,maltose,Yamanashi,stuffed potassium,pumpkin powder.
Pharmaceuticals:Extract Chinese medicine,medicine gum,yeast,vitamins,antibiotics,amylase,lipase enzyme.
Plastic Resin:AB,ABS emulsion,urine-formaldehyde resins,phenol-formaldehyde resin,of plastic(urea)formaldehyde resins,polyethylene,polyvinyl chloride,etc.
Detergent:Advanced detergent and ordinary detergent powder,Feizaofen,soda powder,emulsifier,brighteners,phosphoric acid,etc.
Chemical Industry:hydrocortisone sodium(potassium),alkaline with paint,dye intermediates,Mn3O4,Tsuen a silicate,the catalyst,of sulfuric acid,amino acids,etc.
Ceramics:alumina,ceramic tile materials,magnesium,talc,etc.
Other:aluminum hydroxide,calcium chloride,the cooling spray of stearic acid,etc.
FEATURE
1.Particle size control: The dry particle size can be easily controlled by atomization of the liquid feed and the design of the hot gas inlet. This spray dryer can typically produce between 30 to 500 micron average particle size, in a bell shaped
distribution.
2.The evaporative cooling of product: The heat and mass transfer during drying occurs in the air and vapor films surrounding the droplet. This protective envelope of vapor keeps the particle at the saturation temperature. As long as the particle does not become "bone-dry", evaporation is still taking place and the temperature of the solids will not approach the dryer outlet temperature.
3.Short residence time: The surface area produced by atomization of the liquid feed enables a short gas residence time, ranging from 3-10 seconds depending upon the application, which permits spray drying without thermal degradation.
4.Flow properties of dry product: The shape of most spray dried particles is spherical, which provides for fluid-like flow
properties. This makes many downstream operations, such as packaging, pressing, filtering, and handling easier and less costly.
5.Size design of drying chamber: The size of drying chamber is specially designed to prevent droplets sticking to the inner wall, dried powder accumulating on the cone part and guarantee enough residence time.
DATA SHEET
Tyoe | 50 | 100 | 150 | 200 | 300 | 500 | 1000 |
Watr evapoatin capacty/kg | 50 | 100 | 150 | 200 | 300 | 500 | 1000 |
Oved dmeraionis/mm | 1600 x890 | 2000x11500 | 2400x 13500 | 2800x14800 | 3200x 15400 | 3800x 18800 | 4600x 22500 |
Hagh-pressure pumpressure Mpa | 2-10 | ||||||
Power/KW | 8.5 | 14 | 22 | 24 | 30 | 82 | 30 |
hietar tmpernture/ ℃ | 300-350 | ||||||
Product water contens/% | c5(可达0.5) Less than 5;and 05 can be reached | ||||||
Mtarealrstraton/% | >97 | ||||||
etrichoting/Kw | 75 | 120 | 150 | When the temperature s lor thah 200 thb pramoters should be calculated acondndnt te pacical cndition. | |||
etalyroducngstem Mpat/kw | 0.5+54 | 0.6+90 | 0.6+108 | ||||
Hotir hurnce Kcal/h | 100000 | 150000 | 200000 | 300000 | 400000 | 500000 | 1200000 |
CONTACT
Get in touch with an expert
We´re looking forward to find the suitable solution for your product. Please contact:
Andrew Yang
Engineer Director
Phone: +86 189 7157 0951