How To Solve The Internal Speed Difference During The Useage Of Crusher Machine?

Modern crushing machine has good crushing fineness and speed, and good manipulation performance, fineness can be adjusted at will, you can achieve the purpose of controlling fineness by controlling the length of crushing time.

At present, the crushing machine is widely used for some plant-based fibres, high hardness and high toughness materials, such as Chinese herbs, inorganic substances and minerals.

According to different needs, as well as the continuous innovation and breakthrough of crushing technology, there are various types of crushing equipment on the market, for example, in recent years, ultra-micro crusher is more popular, this type of crusher for Chinese herbal medicine crushing cracked the problem, the use of the crusher can increase the absorption rate of drugs, improve its bioavailability, and help to retain the biological active ingredients, improve the effectiveness of the medicine.

At present, with the rapid development of Chinese herbal medicine and other industries, the crushing equipment industry has huge room for development, and the scope of application will be broadened.

However, for users, it is very important to choose formal, in line with the actual production of crushing equipment, in addition to the need for in-depth knowledge and mastery of the operating methods, maintenance and repair.

It is understood that many users reflect that the purchase of regular manufacturers of factory crushing equipment in use for a period of time, there will be an internal speed difference phenomenon.

The industry pointed out that, if not conditioned, it will affect the effect of the destruction of the crushing equipment. So, how specifically should be conditioned? Some crushing equipment manufacturers have given a few suggestions.

One, the appropriate conditioning hammer sieve gap, so that after conditioning, can increase the hammer blade and the material hammering speed difference, thus mentioning the rate.

It is worth noting that in the process of crushing production, due to different sieve holes, different quality materials, so the hammer and sieve gap needs to be adjusted frequently.

Second, the user should use the sieve hole burr reasonably. The manufacturer said that the side of the sieve punch hairy, can add friction, but not for long, after the sieve hole burr grinding, the power is not, durable moment about 30 minutes to about 1 hour.

Third, add suction wind. It is reported that the system in the destruction machine plus negative pressure, sucking tightly attached to the material on the surface of the sieve, so that the material in the sieve surface friction added, but also can add the hammer and material hammering speed difference, but the suction wind added will also add hammer, sieve wear, power is not durable, together with the power consumption of suction wind will also add.

Fourth, in the destruction machine placed in the rubbing board. It is understood that the rubbing board has the effect of blocking the material ring, but the effect is limited. On the one hand is the effect of the teeth of the rubbing plate on the front of the hammer, the friction surface is small, the hammer wear also has a durable problem. On the other hand, because the rubbing plate to grab the sieve angle, rubbing plate area is too large sieve will be reduced, and sieve area is too small production value will be reduced.

Fifth, the use of fish scale sieve skills. Fish scale sieve appearance has many small protrusions, can play a role in enhancing the effect of friction, fish scale sieve does not occupy the sieve bag angle can increase the sieve area, and than the rubbing plate has progress. But the fish scale sieve of small protrusions simple wear, and more expensive, promotion is very difficult, enterprises in accounting for the increased output value and offset the cost of sieve, the benefit is generally less obvious.

Sixth, the use of thin hammer blade skills. Thin hammer shape side narrow (4 mm or less) principle is not easy to stir up the material, not easy to occur with the hammer blade with the tendency to rotate at the same speed. In general, in the same type of structure of the destruction machine using thin hammer blade, are able to add production value on the basis of the original about 20%, thin hammer blade skills will be greatly enhanced.